July 18, 2008
Video Tip of the Week: Trimming and Glazing a Wire-Faceted Bowl
by Mark Peters | Read Comments (4)
This week’s Video Tip of the Week is a follow-up video on trimming and glazing the wire-faceted bowls Mark Peters demonstrated last week. In today’s video, Mark shares a Cone 10 Temmoku glaze recipe and Randy Johnston’s flashing slip recipe, which he likes to use on these forms. We have also posted these recipes on the site so you don’t have to worry about jotting them down while watching the video. Enjoy! -Jennifer Harnetty, editor.“My work is a collaboration between me, the clay, and the fire. I
work with the clay’s inherent qualities to make objects that are
complimented through the wood firing.” - Mark Peters, Pine Root Pottery
The Allure of Wood FiringOther than getting to satisfy any pyromaniac tendencies you might have, another exciting facet of wood firing
is the element of surprise. Experienced wood firing potters have the know-how to influence the outcomes of their firings, but there is still always some unpredictability when dealing with atmospheric firings.
One of the beautiful and desired effects of firing in a wood kiln is flashing. Flashing is a color change in fired clay or slip due to direct flame contact and residual ash deposition in wood firing. In soda or salt firing it is a result of variable currents of vapor deposition. Flashing can occur on almost any light-colored claybody, but is most dramatic on porcelain bodies and slips.
A flashing slip, like the one Mark uses on the bowl in the video, helps promote flashing effects in the firing. The bowl above has the Randy Johnston Flashing Slip on the outside and is a fine example of flashing effects that are possible. Note: Flashing slips are mainly used for atmospheric firings. If you
fire in an electric kiln or in gas reduction, you should think about a
glaze that
breaks over the texture.
Mark pairs the flashing slip with Temmoku glaze (an example is shown at right), a classic East Asian high-iron gloss glaze, which is black where thick and breaks to brown or red-brown where thin.
A Word on Single FiringMark eliminates the bisque firing, glazing at leather hard and single firing his work. If you have never tried single firing, be sure to do tests before committing an entire kiln load to the technique. To learn more about single firing, see “
An Approach to Single Firing - Further In” by Steven Hill in the
Ceramics Monthly Article Vault.
Flashing Slip Recipe
|
|
| Temmoku Glaze Recipe |
|